Hotline
Sie benötigen Hilfe?0800 - 77 670 22+49 (0)170 - 77 670 22Mo - Fr 9.00 - 18.00 Uhrmehr...
Newsletter
Immer Informiert...!Die besten Angebote
Service
Bilder
Ausstattung
Pantry
Backofen, Grill, Spüle
Nautische Instrumente
Autopilot, Radar, UKW-Funk, Kartenplotter
Technische Ausrüstung
Bilgepumpe el., Batterieladegerät, Bilgepumpe mechanisch
Zubehör
Fender
Beseglung & Rigg
Spinnakereinrichtung, Spinnaker
Sicherheitsausrüstung
Rettungsinsel, Epirb-System
Sonstiges
Remarks :
Classic 50ft steel cutter for sale in Kent:
Artic Explorer is a classic 50ft steel cutter that is currently berthed in Chatham Marina. She was built in 1982 as an ocean going steel vessel with a cutter rig to a designed by Alan Mummery. This yacht has undergone an extensive refit over the past 4 years and is ready to go ocean sailing. It has 7 berths ,a comfortable living area and is powered by a Yanmar 4JH3E (2002) 56 HP diesel engine with a shaft drive to a 3 bladed folding propeller .This boat boasts all the navigation and deck gear you would expect for a ocean going vessel and is ready to set sail. This vessel is UK Vat paid and the owner is willing to delivery to Northern Europe or anywhere in the UK
Accommodation :
This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard.
Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy. The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing.
The seating can also be used to provide two further berths. These berths have appropriate tailored lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc.
The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a three burner stove with oven and grill.
There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck.
The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers.
Inventory :
Deck Equipment: 2 X 55lb CQR Anchors
60m of 10mm anchor chain
100m of anchor warp
Danforth Kedge Anchor with 40m of chain and 30m of warp
Electric Windlass
Danbuoys x 2
Horseshoe buoys x 2
Liferaft 6 person (new 2016 needs a service)
Fenders x 6
Mooring Warps x6
10ft Aluminium rib with 15hp outboard by separate negotiation
Navigation Equipment: Chart Plotter - Raymarine C90W with electronic charts European/Caribbean
AIS Receiver/Transponder -Raymarine
Depth - Raymarine
Speed/log -Raymarine
Wind -Raymarine
Autopilot - Raymarine
Fleming Ocean 60 wind vane
SSB (New SSB Antenna 2023)
VHF/DSC M323 ( New in 2022) with command mic
ST60 Iridium Go Satellite phone
New Mast Antenna
Furuno Radar
Safety Equipment: Fire Extinguishers x 4
Radar Reflector
EPIRB
Liferaft 6 person in need of a service
Jack Stays
Manual Bilge pump x 1
Electric Bilge pumps x 2
Keel:
Traditional long keel with tiller steering
History and Construction:
Weitere Informationen auf Anfrage.
Classic 50ft steel cutter for sale in Kent:
Artic Explorer is a classic 50ft steel cutter that is currently berthed in Chatham Marina. She was built in 1982 as an ocean going steel vessel with a cutter rig to a designed by Alan Mummery. This yacht has undergone an extensive refit over the past 4 years and is ready to go ocean sailing. It has 7 berths ,a comfortable living area and is powered by a Yanmar 4JH3E (2002) 56 HP diesel engine with a shaft drive to a 3 bladed folding propeller .This boat boasts all the navigation and deck gear you would expect for a ocean going vessel and is ready to set sail. This vessel is UK Vat paid and the owner is willing to delivery to Northern Europe or anywhere in the UK
Accommodation :
This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard.
Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy. The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing.
The seating can also be used to provide two further berths. These berths have appropriate tailored lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc.
The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a three burner stove with oven and grill.
There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck.
The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers.
Inventory :
Deck Equipment: 2 X 55lb CQR Anchors
60m of 10mm anchor chain
100m of anchor warp
Danforth Kedge Anchor with 40m of chain and 30m of warp
Electric Windlass
Danbuoys x 2
Horseshoe buoys x 2
Liferaft 6 person (new 2016 needs a service)
Fenders x 6
Mooring Warps x6
10ft Aluminium rib with 15hp outboard by separate negotiation
Navigation Equipment: Chart Plotter - Raymarine C90W with electronic charts European/Caribbean
AIS Receiver/Transponder -Raymarine
Depth - Raymarine
Speed/log -Raymarine
Wind -Raymarine
Autopilot - Raymarine
Fleming Ocean 60 wind vane
SSB (New SSB Antenna 2023)
VHF/DSC M323 ( New in 2022) with command mic
ST60 Iridium Go Satellite phone
New Mast Antenna
Furuno Radar
Safety Equipment: Fire Extinguishers x 4
Radar Reflector
EPIRB
Liferaft 6 person in need of a service
Jack Stays
Manual Bilge pump x 1
Electric Bilge pumps x 2
Keel:
Traditional long keel with tiller steering
History and Construction:
Weitere Informationen auf Anfrage.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Custom built/Eigenbau Classic 50FT Steel Cutter -
Yachttransport Anfrage
Fragen Sie Ihren Yachttransport bei unseren Partnertransporteuren an! Wir leiten Ihre Anfrage dann an die entsprechenden Spezialisten weiter und Sie erhalten dann schnellstmöglich ein unverbindliches Angebot.Selbstverständlich enstehen Ihnen keine zusätzlichen Kosten, wenn Sie über diese Seite www.boote-zu-verkaufen.de anfragen.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Boots- und Yachtfinanzierung
Fragen Sie Ihre gewünschte Finanzierung oder Ihr gewünschtes Leasing gerne bei unserem Partnerfinanzierer an!Ihre individuelle Anfrage wird dort umgehend bearbeitet. Sie erhalten bereits innerhalb von wenigen Stunden Bescheid.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Bootsversicherung Anfrage
Dieses Formular wurde bereits automatisch ausgefüllt, da sichdie Versicherungsanfrage auf das bestimmte Boot aus unsererDatenbank bezieht. Bitte klicken Sie hier, wenn Sie die Voreinstellungen löschen möchten.
Stufe: 1/3
Stufe: 1/3
Wehring & Wolfes ist seit über 30 Jahren Versicherungsmakler für Yachtversicherungen und Bootsversicherungen. Weil wir als Versicherungsexperten und Yachtsportler Branche und Praxis kennen, bieten wir Ihnen individuell zugeschnittene Lösungen zur Versicherung Ihrer Yacht. Und das zu hervorragenden Konditionen und günstigen Prämien.Wehring & Wolfes GmbHKurze Mühren 6 20095 HamburgTelefon:+49(0)40-87979695Telefax: +49(0)40-87 97 96 91E-Mail: info@wehring-wolfes.deInternet: www.wehring-wolfes.de
Diese Boote könnten Sie auch interessieren
Preis: € 7.200.000,00
Baujahr: 2023 Länge: 14.85m Breite:4.74m
Liegeplatz: Norwegen, Vollen Marina
Liegeplatz: Norwegen, Vollen Marina
Preis: € 2.995.000,00
Baujahr: 2006 Länge: 14.20m Breite:3.60m
Liegeplatz: Schweden, 3 Brantvägen, Saltsjöbaden
Liegeplatz: Schweden, 3 Brantvägen, Saltsjöbaden
Preis: € 2.295.000,00
Baujahr: 2005 Länge: 16.15m Breite:4.91m
Liegeplatz: Dänemark, Kerteminde
Liegeplatz: Dänemark, Kerteminde
Preis: € 2.175.000,00
Baujahr: 2023 Länge: 15.24m Breite:7.98m
Liegeplatz: Italien, Mar Tirreno
Liegeplatz: Italien, Mar Tirreno
Preis: € 2.095.000,00
Baujahr: 2010 Länge: 14.40m Breite:4.25m
Liegeplatz: Schweden, Yachtsale - Båt, Saltsjöbaden
Liegeplatz: Schweden, Yachtsale - Båt, Saltsjöbaden
zurück
Copyright 2007 - 2024 by Carsten Rettig