Up to date offers on 14.05.2024
Hotline
Do you need help?+49 - (0)170 - 77 670 22Mon. – Fri.9.00 - 18.00 hrsmore...
Newsletter
Always informed...!The best offers
Service
Pictures
Equipment
Pantry
Oven, barbecue, Sink
Nautical instruments
Autopilot, Radar, VHF Radio, Map plotter
Technical fittings
Electrical bilge pump, Battery charger, Mechanical bilge pump
Accessories
Fender
Sailed & Rigg
Spinnaker furnishing, spinnaker
Safety equipment
Life raft, Epirb-System
Other
Remarks :
Classic 50ft steel cutter for sale in Kent:
Artic Explorer is a classic 50ft steel cutter that is currently berthed in Chatham Marina. She was built in 1982 as an ocean going steel vessel with a cutter rig to a designed by Alan Mummery. This yacht has undergone an extensive refit over the past 4 years and is ready to go ocean sailing. It has 7 berths ,a comfortable living area and is powered by a Yanmar 4JH3E (2002) 56 HP diesel engine with a shaft drive to a 3 bladed folding propeller .This boat boasts all the navigation and deck gear you would expect for a ocean going vessel and is ready to set sail. This vessel is UK Vat paid and the owner is willing to delivery to Northern Europe or anywhere in the UK
Accommodation :
This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard.
Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy. The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing.
The seating can also be used to provide two further berths. These berths have appropriate tailored lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc.
The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a three burner stove with oven and grill.
There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck.
The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers.
Inventory :
Deck Equipment: 2 X 55lb CQR Anchors
60m of 10mm anchor chain
100m of anchor warp
Danforth Kedge Anchor with 40m of chain and 30m of warp
Electric Windlass
Danbuoys x 2
Horseshoe buoys x 2
Liferaft 6 person (new 2016 needs a service)
Fenders x 6
Mooring Warps x6
10ft Aluminium rib with 15hp outboard by separate negotiation
Navigation Equipment: Chart Plotter - Raymarine C90W with electronic charts European/Caribbean
AIS Receiver/Transponder -Raymarine
Depth - Raymarine
Speed/log -Raymarine
Wind -Raymarine
Autopilot - Raymarine
Fleming Ocean 60 wind vane
SSB (New SSB Antenna 2023)
VHF/DSC M323 ( New in 2022) with command mic
ST60 Iridium Go Satellite phone
New Mast Antenna
Furuno Radar
Safety Equipment: Fire Extinguishers x 4
Radar Reflector
EPIRB
Liferaft 6 person in need of a service
Jack Stays
Manual Bilge pump x 1
Electric Bilge pumps x 2
Keel:
Traditional long keel with tiller steering
History and Construction:
Ask us for more information.
Classic 50ft steel cutter for sale in Kent:
Artic Explorer is a classic 50ft steel cutter that is currently berthed in Chatham Marina. She was built in 1982 as an ocean going steel vessel with a cutter rig to a designed by Alan Mummery. This yacht has undergone an extensive refit over the past 4 years and is ready to go ocean sailing. It has 7 berths ,a comfortable living area and is powered by a Yanmar 4JH3E (2002) 56 HP diesel engine with a shaft drive to a 3 bladed folding propeller .This boat boasts all the navigation and deck gear you would expect for a ocean going vessel and is ready to set sail. This vessel is UK Vat paid and the owner is willing to delivery to Northern Europe or anywhere in the UK
Accommodation :
This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard.
Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy. The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing.
The seating can also be used to provide two further berths. These berths have appropriate tailored lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc.
The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a three burner stove with oven and grill.
There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck.
The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers.
Inventory :
Deck Equipment: 2 X 55lb CQR Anchors
60m of 10mm anchor chain
100m of anchor warp
Danforth Kedge Anchor with 40m of chain and 30m of warp
Electric Windlass
Danbuoys x 2
Horseshoe buoys x 2
Liferaft 6 person (new 2016 needs a service)
Fenders x 6
Mooring Warps x6
10ft Aluminium rib with 15hp outboard by separate negotiation
Navigation Equipment: Chart Plotter - Raymarine C90W with electronic charts European/Caribbean
AIS Receiver/Transponder -Raymarine
Depth - Raymarine
Speed/log -Raymarine
Wind -Raymarine
Autopilot - Raymarine
Fleming Ocean 60 wind vane
SSB (New SSB Antenna 2023)
VHF/DSC M323 ( New in 2022) with command mic
ST60 Iridium Go Satellite phone
New Mast Antenna
Furuno Radar
Safety Equipment: Fire Extinguishers x 4
Radar Reflector
EPIRB
Liferaft 6 person in need of a service
Jack Stays
Manual Bilge pump x 1
Electric Bilge pumps x 2
Keel:
Traditional long keel with tiller steering
History and Construction:
Ask us for more information.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Custom built/Eigenbau Classic 50FT Steel Cutter -
Yacht transport enquiry
Please enquire about yacht transportation here Partnertransporteur! Your individual enquiry will be calculated free of charge. You will receive an unbinding quote as soon as possible. You will of course not incur any additional costs if you enquire via this page www.boats-yachts-for-sale.com.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Boat and yacht financing
Request possible financing or leasing options directly from our financial partner. Your individual request will be dealt with immediately. You will receive a reply within a few hours.
Custom built/Eigenbau Classic 50FT Steel Cutter -
Boat insurance enquiry
This form has already been filled in automatically as the insurance inquiry is linked to s specific boat in our data base. Please click here if you would like to delete these entries.
Level: 1/3
Level: 1/3
Wehring & Wolfes has been an insurance broker for yacht and boat insurances for the past 30 years. As an insurance expert that knows the yachting industry extremely well, we are able to offer advice with regard to individually tailored insurance solutions for your yacht. We offer excellent conditions and favorable premiums.Wehring & Wolfes GmbHJohannes-Brahms-Platz120355 Hamburg.Telephone:+49(0)40-87979695Telefax: +49(0)40-87 97 96 91E-Mail: info@wehring-wolfes.deInternet: www.wehring-wolfes.de
weitere boote die sie interessiere koennten
Price: € 7,200,000.00
Year of manufacture: 2023 Length: 14.85m Width:4.74m
Berth: Norway, Vollen Marina
Berth: Norway, Vollen Marina
Price: € 2,995,000.00
Year of manufacture: 2006 Length: 14.20m Width:3.60m
Berth: Sweden, 3 Brantvägen, Saltsjöbaden
Berth: Sweden, 3 Brantvägen, Saltsjöbaden
Price: € 2,375,000.00
Year of manufacture: 2005 Length: 16.15m Width:4.91m
Berth: Denmark, Kerteminde
Berth: Denmark, Kerteminde
Price: € 2,175,000.00
Year of manufacture: 2023 Length: 15.24m Width:7.98m
Berth: Italy, Mar Tirreno
Berth: Italy, Mar Tirreno
Price: € 2,095,000.00
Year of manufacture: 2010 Length: 14.40m Width:4.25m
Berth: Sweden, Yachtsale - Båt, Saltsjöbaden
Berth: Sweden, Yachtsale - Båt, Saltsjöbaden
Back
Copyright 2007 - 2024 by Carsten Rettig